Precipitation Chemistry Screening

Humate Tank-Mix Compatibility Checker

Prevent emitter clogging, nozzle blockages, and flocculation before mixing. Select a tank-mix partner and water hardness profile to inspect compatibility and precipitation chemistry.

1. Select Mix Components

Base Humic Source
Quick Select Partner
RED — INCOMPATIBLE Potassium Humate + Calcium Nitrate

Do Not Tank-Mix — Immediate Calcium Humate Precipitation

Precipitation & Solution Chemistry

Recommended Field Protocol

Potassium Humate Compatibility Matrix (At-a-Glance)

Summary for standard alkaline-extracted Potassium Humate (pH 9.0–10.5) in soft-to-moderate irrigation water. Always run a physical 1-liter jar test before scaling to a full spray or fertigation tank.

Partner Input Status Primary Chemical Mechanism Safe Workaround
Calcium Nitrate RED — Incompatible Divalent Ca²⁺ bridges carboxylate groups into insoluble flocs. Separate A/B fertigation tanks or switch to true Fulvic Acid.
Low-pH Acids (H₃PO₄ / HNO₃) RED — Incompatible Protonation below pH 4–5 precipitates insoluble humic acid sludge. Apply acids in a separate flushing cycle or use Fulvic Acid.
Magnesium Sulfate (MgSO₄) AMBER — Caution Divalent Mg²⁺ triggers salting-out in concentrated stock tanks or hard water. Separate stock tanks for drip; jar-test at dilute foliar rates only.
L-Amino Acids AMBER — Conditional Acid-hydrolyzed amino products (pH 3.5–5.0) can precipitate humates. Use neutral enzymatic L-amino acids; keep final tank pH ≥ 6.0.
Urea / Neutral NPK GREEN — Compatible Neutral monovalent solutions preserve humate colloidal stability. Dissolve humate in full tank water first; avoid acidic MAP stocks.
Seaweed Extract (A. nodosum) GREEN — Highly Compatible Alkaline/neutral kelp extraction aligns with potassium humate pH. Dilute separately into water-filled tank for synergistic foliar/drip use.

Tank-Mix Chemistry FAQs

Why does Potassium Humate precipitate when mixed with Calcium Nitrate?

Potassium humate is stabilized in solution by monovalent potassium ions (K⁺) balancing negatively charged carboxylate (–COO⁻) and phenolate (–O⁻) groups. Introducing divalent calcium (Ca²⁺) displaces potassium and cross-links adjacent humic assemblies into insoluble calcium humate flocs that clog nozzles and drip emitters.

What happens if I mix humic acid with phosphoric or nitric acid?

By international IHSS definition, humic acids are soluble at alkaline-to-neutral pH and precipitate below pH 2–4. Strong mineral acids protonate carboxylate groups into neutral carboxylic acid (–COOH), collapsing electrostatic repulsion and forcing humic polymers out of solution as dark sludge.

Does Fulvic Acid have the same tank-mix restrictions as Potassium Humate?

No. True fulvic acid (verified via ISO 19822 / DAX-8 resin fractionation) has a lower molecular weight and higher oxygen-containing functional group density, allowing it to remain completely soluble across pH 1–14 and in the presence of calcium or magnesium ions.