Agronomic Field Calculator

Potassium Humate & Fulvic Acid Dosage Calculator

Compute evidence-based application rates by product formulation, application method, field area (acres or hectares), and baseline soil organic matter.

1. Field & Product Parameters

2. Recommended Application Rate

Drip Fertigation
Total Product Required (Optimal Target)
—
—
Conservative Min —
Upper Limit Max —
Per-Unit Rate

—

Carrier Water / Dilution

—

Agronomic Protocol & Precautions

—

Baseline Agronomic Reference Rates (Standard Loam Soil)

Rates assume verified ISO 19822 humic concentrations (70–85% soluble potassium humate powder, 70–80% fulvic acid powder, or 12% w/v liquid humate). Always validate local water hardness before injection.

Application Method K-Humate Powder (70–85%) Fulvic Powder (70–80%) Liquid Humate (12% HA)
Drip Fertigation 1.0–2.5 kg/ha (0.4–1.0 kg/ac) 0.5–1.5 kg/ha (0.2–0.6 kg/ac) 5–12 L/ha (2–5 L/ac)
Soil Broadcast / Basal 4.0–10.0 kg/ha (1.6–4.0 kg/ac) 1.5–3.0 kg/ha (0.6–1.2 kg/ac) 15–30 L/ha (6–12 L/ac)
Foliar Spray 0.3–0.6 kg/ha (0.12–0.24 kg/ac) 0.15–0.40 kg/ha (0.06–0.16 kg/ac) 1.5–3.0 L/ha (0.6–1.2 L/ac)
Seed Treatment 150–300 g / 100 kg seed 50–120 g / 100 kg seed 300–600 mL / 100 kg seed

Calculator FAQs

Why does Potassium Humate dosage vary so widely between foliar spray and soil broadcast?

Soil broadcast applications must interact with a large mass of mineral soil particles and clay exchange sites, requiring 4 to 10 kg/ha of concentrated potassium humate. Foliar sprays contact thin leaf cuticles directly, where concentrations above 0.1–0.2% w/v can leave dark residues or induce osmotic stress, so rates remain between 0.3 and 0.6 kg/ha.

Can applying higher than recommended rates of humic acid improve crop response?

No. Peer-reviewed dose-response studies demonstrate a classic bell-shaped (hormetic) curve for humic substances. Excessive concentrations can temporarily immobilize micronutrients, elevate rhizosphere electrical conductivity, or inhibit root elongation rather than stimulate it.

Should I adjust humic dosage for sandy versus clay soils?

Yes. Coarse-textured sandy soils with low native organic matter (<1.5%) and low cation exchange capacity respond more strongly to slightly elevated split doses (+15–20%), whereas high-organic-matter clay loams generally require lower maintenance rates (-15%).